# 12025 Brushless DC Cooling Fan — 4.75 Inch (120×120×25mm) 12V Exhaust Fan

- Link: https://gssuperstore.in/product/12025-brushless-dc-cooling-fan-4-75-inch-120x120x25mm-12v-exhaust-fan/
- Published: 2026-08-03T09:46:12+05:30
- Author: Karan7055

## 12025 Brushless DC Cooling Fan — 4.75 Inch (120×120×25mm), 12V

Deliver powerful, reliable airflow to your system with the **12025 Brushless 12V
DC Exhaust Cooling Fan**. Built to the standard **120mm × 120mm × 25mm (4.75 inch)**
form factor, this fan is engineered for consistent forced-air cooling across PC 
builds, server enclosures, industrial control panels, and ventilation systems — 
anywhere that demands dependable thermal management.

The **brushless motor** eliminates the mechanical wear associated with brushed designs,
delivering a rated service life exceeding **30,000 hours**. Operating at **12V DC**—
the standard voltage on ATX PSU rails, industrial power supplies, and 12V adapters—
this fan is a straightforward, drop-in cooling upgrade with no additional circuitry
required.

### Key Features

 * **Brushless motor** — extended lifespan, reduced noise, zero brush maintenance
 * **Standard 120mm mounting** — fits all 120mm fan mounts with M4 corner screws
 * **12V DC input** — compatible with ATX PSUs, 12V rails, and industrial power 
   supplies
 * **25mm slim profile** — maximises airflow within tight chassis clearances
 * **Axial exhaust design** — optimised for exhaust and intake applications
 * **Low vibration frame** — quiet operation suitable for always-on installations

### Specifications

  |  Specification |  Details |  
   |  Fan model |  12025 |  
 |  Dimensions |  120mm × 120mm × 25mm |  
 |  Imperial size |  4.75 inch |  
 |  Operating voltage |  12V DC |  
 |  Motor type |  Brushless |  
 |  Airflow type |  Axial / exhaust forced air |  
 |  Mounting type |  Panel mount — 4× corner screw holes (M4) |  
 |  Connector |  2-pin / 3-pin (model dependent) |  
 |  Rated lifespan |  30,000+ hours MTBF |

### Compatible With

 * ATX desktop PC cases — front intake, rear exhaust, or top exhaust positions
 * Server racks and 1U / 2U rackmount enclosures
 * Industrial control panels and electrical cabinets
 * Networking equipment — switches, NAS boxes, routers
 * Laser engravers, 3D printers, and CNC control bays
 * DIY home lab builds and fanless-to-active cooling conversions
 * CCTV DVR / NVR systems and set-top boxes

### Installation Guide

 1. Identify airflow direction — the _label side_ faces the air intake; the _frame/
    strut side_ is the exhaust.
 2. Connect the red wire to **12V positive** and the black wire to **GND**. If using
    a 3-pin connector, the yellow wire carries tachometer signal for speed monitoring.
 3. For PC builds: plug the connector into a chassis fan header on your motherboard
    or directly into a Molex adapter on the PSU.
 4. Secure with four M4 screws through the corner mounting holes into your panel, bracket,
    or chassis.
 5. Ensure a minimum **15mm clearance** on both the intake and exhaust sides for unrestricted
    airflow.
 6. Keep fan blades and grilles free of dust build-up — clean with compressed air every
    3–6 months for optimal performance.

The 12025 Brushless 12V DC Fan ships ready to install — standard 120mm mounting,
no adapters needed. Compatible with virtually every 120mm fan slot across consumer
and industrial enclosures.
