# CNY17-1 Optocoupler DIP-6 – Low CTR Phototransistor Opto-Isolator IC

- Link: https://gssuperstore.in/product/cny17-1-optocoupler-dip-6-low-ctr-phototransistor-opto-isolator-ic/
- Published: 2026-08-03T18:35:04+05:30
- Author: Karan7055

## CNY17-1 Optocoupler DIP-6 – Low CTR Phototransistor Opto-Isolator IC

The **CNY17-1 Optocoupler** is a reliable phototransistor output opto-isolator IC
that integrates an infrared LED and a silicon phototransistor inside a compact **
DIP-6 through-hole package**. Classified as a low-CTR variant within the CNY17 series,
the CNY17-1 is ideal for applications that require controlled signal transfer, electrical
isolation, and predictable performance. It effectively isolates low-voltage control
circuits from high-voltage or noisy power sections, protecting sensitive electronics
from voltage spikes, transients, and ground-loop interference. This optocoupler 
is commonly used in SMPS feedback loops, industrial automation, PLC input modules,
relay driving circuits, and microcontroller signal isolation, where long-term stability
and electrical safety are critical.

  |  Specification |  Details |  
   |  Part Number |  CNY17-1 |  
 |  Device Type |  Optocoupler / Opto-Isolator IC |  
 |  Output Type |  Phototransistor |  
 |  CTR Rank |  CNY17-1 (Low CTR Range) |  
 |  Isolation Voltage |  Up to 5000Vrms |  
 |  Collector-Emitter Voltage |  70V Max |  
 |  Input LED Forward Voltage |  1.2V Typical |  
 |  Package Type |  DIP-6 Through-Hole |

### Applications

 * SMPS feedback and regulation circuits
 * Industrial automation and PLC inputs
 * Relay driver and switching isolation
 * Microcontroller signal isolation
 * Noise suppression and ground-loop protection
 * Sensor and control signal interfacing

### How to Use

 1. Connect a current-limiting resistor in series with the input LED.
 2. Drive the LED from a logic or control signal.
 3. Use a pull-up resistor on the phototransistor output.
 4. Maintain sufficient PCB clearance for safe isolation.
 5. Do not exceed LED current or transistor voltage ratings.
