# MOC8103 Optocoupler DIP – Phototransistor Output Isolation IC

- Link: https://gssuperstore.in/product/moc8103-optocoupler-dip-phototransistor-output-isolation-ic/
- Published: 2026-08-03T09:45:46+05:30
- Author: Karan7055

## MOC8103 Optocoupler DIP – Phototransistor Output Isolation IC

The **MOC8103 optocoupler** is a reliable opto-isolation IC designed to electrically
isolate low-voltage control circuits from high-voltage or noisy power sections. 
It integrates an infrared LED and a phototransistor in a single **DIP package**,
ensuring effective signal transfer without direct electrical connection. The MOC8103
is widely used in SMPS, industrial controllers, relay driving circuits, and microcontroller-
based applications where noise immunity and user safety are critical.

  |  Specification |  Details |  
   |  Part Number |  MOC8103 |  
 |  Device Type |  Optocoupler / Opto-Isolator |  
 |  Output Type |  Phototransistor |  
 |  Isolation Voltage |  Up to 5000Vrms (typical) |  
 |  Collector-Emitter Voltage |  30V |  
 |  Forward Current |  10mA nominal |  
 |  Package |  DIP-6 Through-Hole |

### Applications

 * SMPS feedback and isolation circuits
 * Microcontroller and PLC input isolation
 * Relay and TRIAC driving circuits
 * Industrial control and automation systems
 * Noise-sensitive signal coupling

### How to Use

 1. Connect the input LED pins with a current-limiting resistor from the control signal.
 2. Ensure correct polarity when driving the internal IR LED.
 3. Use the phototransistor output side for high-voltage or noisy sections.
 4. Maintain adequate PCB spacing for maximum isolation performance.
 5. Verify output logic levels before connecting sensitive ICs.
